Typical vs individual

It rarely happens that people sit down at a table, write a task, and then design several dozen houses, work through to the last nail, call them “typical”, transfer them to the sales department, to production and never return to this question. Most often, everything happens differently. Either they start from scratch, or some project is taken as a basis and it is redone according to the requirements of the customer.

There are “successful” projects that many people like. But even the “most” of the “most” almost never go unchanged. First you need to change the diameter of the logs, then make a mirror version, resize windows and doors, change elevations, and there are a lot of pretexts for remaking. Those. even, it would seem, the most typical project can be quite individual. Seeing something familiar, do not rush to give an assessment, take a closer look, most likely, you will find a lot of individual.

Optimization of log cutting in the design of wooden houses

The struggle to reduce waste begins long before the first log is lifted onto the machine. During the preparation of architectural drawings, in parallel there is a check of the cutting of logs. It happens that nothing even needs to be fixed. But it so happens that the designer spends a long time in search of the best option. There are several introductory ones – you need to adhere to the architectural solution, you can not violate the structural strength of the wooden house, you should take into account the possibilities of supply and placement on the site. You can influence the cutting in several ways – resize, move, add or remove openings; change the size of the premises; introduce or remove cuts; carefully analyze the joining of logs in the walls; change the scope of each delivery.

With constant contact with the customer, production and the foreman at the facility, the desired result is achieved.

What are we designing

Designing is carried out in the K3 Cottage program. The program allows you to design saunas and log houses, perform the CD section (wooden structure) quite qualitatively, and draw up working drawings. To do rafter systems projects. Many types of work are automated, reports can be compiled quickly with a few keystrokes. The program can be configured for a specific production, a specific machine, which avoids errors, overlays, errors.