House project №11 with a terrace
S = 169 sq.m.
House project with a terrace
Two-storey wooden house
Project No. 11 of a house with a terrace, measuring 10.5 x 11.7 m, with a total area of 169 sq. M. Of these, the area of the terrace and balcony is 24.86 square meters, the usable area is 144 square meters.
The house is designed and built from rounded logs with a diameter of 240 mm. The volume of the set of logs is approximately 75 cubic meters.
Composition of premises
First floor
Terrace – 20.77 m / sq
Kitchen – living room – 35.66 m / sq
Entrance hall – 16.09 m / sq
Boiler room – 5.95 m / sq
Bathroom – 5.55 m / sq
Bedroom – 11.76 m / sq
Ground floor area 95.37 m / sq
Composition of premises
Second floor
Hall – 11.16 m / sq
Bedroom – 11.76 m / sq
Bathroom – 11.76 m / sq
Bedroom – 14.95 m / sq
Bedroom – 20 m / sq
Balcony – 4.09 m / sq
Ground floor area 73.71 m / sq
Total area 169 m / sq
Features of the project
The main feature is a large L-shaped terrace, under the same roof as the house, and not some nominal, conventional, but quite practical terrace, with the ability to put a table and drink tea with the family. There are two exits planned. One summer from the living room, and a winter one through the hallway. The boiler room is located in the house.
On the ground floor, there is one bedroom for the older generation, so as not to go upstairs. The second floor has three bedrooms. The main, master’s room has an area of 20 meters. The bathroom on the second floor is spacious, bright, with a large window.
Design features
The project is distinguished by the remarkable simplicity of the gable roof. The sliding, conflict-free rafter system allows you to do all the work in one go. Any type of roof covering is suitable for roofing work.
We offer sets of houses and baths made of cylindred logs with a diameter of 180mm, 200mm, 220mm, 240mm, 260mm, 280mm, 300mm. The cost of the kit depends on the diameter of the log.
Contact us